A home weather station will be supplied with various components whenever you buy them. These components are important in terms of the whole functioning of the weather station. Depending on the types of sensors, they can be mounted outdoors or indoors for better accuracy. The mounting options arises from the sensor needs as directed by manufacturer. Below are some of the best ways to mount weather stations.
Mounting on Grass
This is for people who have a lot of land in the rural sites and they want to monitor the different weather conditions. You will be in a position to do so with a simple tripod for mounting the equipment on the grass. You do not want the equipment to be in direct contact with grass for splashing reasons. The mounting tripod or a pole could be used to elevate the sensors off the ground. This type of mounting does not require too much labor to get the job done.
- This mounting does not often need professional help to get it done
- You can mount the weather station easily
- The sensors are easily reached for routine maintenance
- You easily get accurate data from the backyard
- You cannot have it under shaded areas
- Anyone can access it meaning easy distractions all the time
Mounting on the concrete floor
This part it could be a ground floor or roof top made of concrete. As you can see, penetrating the concrete will be out of option. You will need something that will hold the sensor in position without messing with the floor. You still have to make sure that there are no obstructions in the area to keep it from having inaccurate readings. The non-penetrating mounts you get for weather stations in this case will have a heavier base to keep it from falling. Troubleshooting should be easy, as you can move the mount easily to where it is required.
- Easy installation as you do not have to penetrate the flow
- It can be moved from one place to another with ease
- No need for professional help when mounting it
- The strong winds or storms could easily blow the stations as they are not fixed permanently
Mounting on pitched roofs
If you have less space and you are wondering where to mount weather station, then this could be just your solution. The pitched roofs are used when you live in placed with lots of obstructions. The pitched roof will act as the highest point of the area to give you better readings with weather station sensors. This time round you will have to screw the weather station mounts into the tar pads. Once it is mounted, you should have an easier time getting all the readings you. In this case, the mounted weather stations is not prone to easy theft as compared to mounting on concrete floors.
- No cases of tampering as the weather station is mounted high enough
- The strong winds will not easily affect the station due to strong mounts
- Maintenance can be an issue as it is mounted high from the ground
- Drilling holes in your roofs will make it start to leak if you are not careful
Mounting on the eaves
The eave can be seen as the best place to mount home weather stations. Well, an eave is an overhang between the roof and the wall. Most of the time this place would be great as it provides the cover most weather station sensors need today. With the correct mounting, you will never have to worry about incorrect reading for the outdoor conditions. The weather stations with low transmission distance could also benefit from using such type of mounting. The best part is that the eave could be great for the sensitive sensors from different weather conditions.
- It is seen to be great for stations with low ranges
- It is great for sensitive sensors
- It does not need any additional space to install it
- You might need professional help to set it up sometimes
- The mount should always be strong for the proper working of the station
Mounting on the Chimney
If you are still having the question of where is the best place to mount a weather station, then the chimney could be the best solution. We all know that sometimes you will not have a pitched roof and the chimney will always be the tall point of the building. Whenever you get to mount the weather station sensors up there, they will be free from obstructions. No one would easily tamper with your weather station sensors as they will be mounted far from anyone’s reach.
The common issue with this method will be the amount of heat coming from the chimney. If you do not mount the sensors on a pole first, then the heat will cause it to have incorrect readings. Maintenance could be an issue as the sensors are mounted at a high point.
- The weather stations will be mounted away from any type of obstructions
- It does not any extra space for mounting
- No cases of manual tampering from other individuals
- You might need professional for mounting it
- Routine maintenance is not going to be easy
Mounting on an existing mast
In most urban areas, you will get that the building rooftops will have many TV or radio antennas. The antenna will be mounted on a mast high enough to get a better reception. With a weather station mast, you can add it to the TV antenna mast. Just like that you have found a great place where to mount weather station sensors. No extra space or drilling is needed for this type of mounting.
- No need for additional space with the existing masts available
- The mounting process is easy as you simply clamp your mount on other masts
- Sometimes the existing masts might not be sturdy and strong
- The transmission might be affected by the antennas sometimes
As you can see, there are various methods you could use for mounting weather stations. If you previously only knew about three, now you know more. The key lies in choosing the right mounting method for your scenario.